China Laser Cladding System Manufacturers Factory Suppliers
-
Laser Cladding SystemLaser Output Power: 1200-3200Wread more
Coaxial Powder Feed Rate: 0.4-2.2 kg/h
Powder Feed Accuracy Error: ≤±0.04kg/h
Minimum Workpiece Outer Diameter: Φ10mm
Cladding Thickness... -
Laser Metal Deposition MachineLaser Output Power: 6000-12000Wread more
Coaxial Powder Feed Rate: 2.5-8.0 kg/h
Adjustable Spot Diameter: 3.0-8.0 mm
Single Pass Cladding Width: 10-20 mm
Cladding Layer Dilution... -
Laser Additive Manufacturing MachineLaser Output Power: 1500-4500Wread more
Coaxial Powder Feed Rate: 0.5-3.2 kg/h
Adjustable Spot Diameter: 1.2-4.0 mm
Single Layer Deposition Thickness: 0.2-1.0 mm
Working Cavity... -
Direct Metal Deposition MachineLaser Output Power: 2000-5000Wread more
Coaxial Powder Feed Rate: 0.7-3.8 kg/h
Adjustable Spot Diameter: 1.8-5.0 mm
Single Pass Cladding Width: 5-12 mm
Cladding Layer Dilution... -
DED MachineLaser Output Power: 3000-7000Wread more
Coaxial Powder Feed Rate: 1.0-5.2 kg/h
Adjustable Spot Diameter: 2.2-6.5 mm
Defocus Adjustment Range: -10~+15mm
Cladding Layer Dilution... -
Directed Energy Deposition MachineLaser Output Power: 2500-6500Wread more
Coaxial Powder Feed Rate: 0.9-4.8 kg/h
Adjustable Spot Diameter: 1.5-5.5 mm
Motion Axes: 5-Axis Linkage
Cladding Layer Dilution Rate: 3-7% -
Direct Energy Deposition MachineLaser Output Power: 4000-10000Wread more
Coaxial Powder Feed Rate: 2.0-7.2 kg/h
Adjustable Spot Diameter: 2.5-7.5 mm
Single Pass Cladding Width: 8-18 mm
Cladding Layer Dilution... -
Oilfield Laser Cladding MachineLaser Output Power: 4000-8000Wread more
Coaxial Powder Feed Rate: 1.2-6.0 kg/h
Cladding Layer Hardness: 36-44HRC
Compatible Powders: Inconel625, Stellite6
Workpiece Preheating... -
Valve Laser Cladding MachineLaser Output Power: 2500-5500Wread more
Coaxial Powder Feed Rate: 0.8-4.0 kg/h
Cladding Layer Hardness: 42-49HRC
Minimum Cladding Inner Diameter: Φ40mm
Closed-Loop Spot... -
Thermal Power Laser Cladding MachineLaser Output Power: 3000-6800Wread more
Coaxial Powder Feed Rate: 1.0-5.0 kg/h
High-Temperature Hardness at 450℃: ≥30HRC
Water-Cooled Cladding Head: Standard
Cladding Layer... -
Wind Shaft DED Repair EquipmentLaser Output Power: 3500-7500Wread more
Coaxial Powder Feed Rate: 1.5-6.0 kg/h
Shaft Length Capacity: 4000mm
Shaft Diameter Capacity: 800mm
Adjustable Spot Diameter: 2.0-7.0 mm -
Mining Laser Cladding MachineLaser Output Power: 6000-12000Wread more
Coaxial Powder Feed Rate: 2.8-8.2 kg/h
Cladding Layer Hardness: 51-59HRC
Single Layer Thickness: 0.8-2.2 mm
Single Pass Width: 11-21 mm
Fundamentals Of Laser Cladding: Typical single layer thickness: 0.2 - 2.0mm (multiple layers possible) Heat input to part: low to moderate Dilution with substrate material: variable with parameters...
Modular Laser Cladding Systems Turn-key Laser Cladding Systems HVOF, Atmospheric Plasma Thermal Spray Systems Auxiliary Equipment Ready to get started? Great, so are we! Simply fill in the form below...
We are capable of creating heavy duty systems for cladding parts up to 26 meters long, but also for parts of just a few centimeters; from conventional cladding speeds to extreme high-speed cladding...
laser cladding technology is to use high energy laser beam (104-106w / cm2) to irradiation on the metal surface, synchronous melting, expansion and solidification, on the substrate surface with a...
Laser cladding, also known as laser metal deposition, is a technique for adding one material to the surface of another. Laser cladding involves the feeding of a stream of metallic powder or wire into...
The Fraunhofer Institute for Material and Beam Technology IWS in Dresden, Germany, developed the ‘Laser Cladding Center’ (LCC) together with Siemens Energy. Holger Hillig, a Fraunhofer expert for...
