Lightweight Material for Additive Manufacturing Applications
Our Magnesium Alloy Powder is a specialty material for lightweight component manufacturing in additive manufacturing. The chemical composition follows the Mg-9Al-1Zn-0.2Mn formulation, delivering a deposited part microhardness of 75 to 110 HV. Magnesium is known as the lightest structural metal, offering significant weight reduction potential for aerospace, automotive lightweighting, and 3C electronics applications. Our powder is produced using inert gas atomization with full protective atmosphere throughout the process. This effectively prevents oxidation and combustion risks during manufacturing. We have a research collaboration with Nantong University on magnesium alloy additive manufacturing, giving us specialized technical expertise in process parameter optimization for our Magnesium Alloy Powder.
Fine Particle Size for Precision Deposition
The particle size range of this powder is 20 to 75 micrometers, falling into the fine powder category suitable for precision additive manufacturing. The spherical ratio is above 88%, and the oxygen content is controlled below 350 parts per million. The flowability does not exceed 24 seconds per 50 grams, and the apparent density ranges from 1.7 to 2.0 grams per cubic centimeter. Magnesium alloy powder has high reactivity. We take special protective measures in packaging and storage to ensure safety during transport and storage. We recommend using this powder under inert gas protection and following relevant safety operating procedures. Our Magnesium Alloy Powder enables lightweight innovation with confidence.
Technical Support and Trial Services
Our process engineers provide specialized technical support for magnesium alloy additive manufacturing. This includes optimization of substrate preheating temperature, scanning strategy, and shielding gas flow rate. If you are new to magnesium alloy additive manufacturing, we can conduct trial manufacturing for you first. We provide a complete process parameter package before formal procurement, helping to reduce your technical risk with our Magnesium Alloy Powder.
Technical Specifications
|
Parameter |
Value |
|
Main Chemical Composition |
Mg-9Al-1Zn-0.2Mn |
|
Particle Size Range |
20-75μm |
|
Powder Morphology |
Spherical Rate ≥88% |
|
Oxygen Content |
≤350ppm |
|
Deposited Part Microhardness |
75-110HV |
|
Flowability |
≤24s/50g |
|
Apparent Density |
1.7-2.0 g/cm³ |
Hot Tags: magnesium alloy powder, China magnesium alloy powder manufacturers, suppliers, factory
